Skip to content
Free site measures across Glen Waverley and the City of Monash (03) 7302 2900
Glen WaverleyConcreters
  1. Home
  2. Guides
  3. The Monash vehicle crossing permit, explained

Monash vehicle crossing permits, explained properly

The crossover is the strip of driveway between your boundary and the road, and in the City of Monash the council controls it. This guide covers when the permit applies, the 2026-27 fees, the rules your crossing has to meet and how the two inspections run, so nothing about the street end of a driveway job surprises you.

Checked and current at 16 November 2026 · facts drawn from the City of Monash's published permit rules and fee schedule

Free site measure

We come to the job, walk it with you and take the levels. No charge, no obligation to go ahead.

One written figure

The quote lands in writing after the measure and that number is the number. No day-of extras.

Rates in the open

Every per metre rate we charge is published on this site before you ever ring us.

Monash crossovers handled

Crossing permits, council clearances and inspections are priced into the quote where your job needs them.

Do you need a vehicle crossing permit in Monash?

If the section of driveway that crosses the footpath and nature strip is being built, rebuilt, widened, moved or removed, yes. The City of Monash requires a vehicle crossing permit for that strip because it sits on council land, not yours, and a building or town planning permit does not cover it; the crossing is approved separately every time. Replacing a cracked crossover like for like still counts as reconstruction, which is why nearly every driveway replacement we pour around Glen Waverley and Mount Waverley carries one.

The concrete inside your boundary needs no permit at all. The council’s interest stops at your property line.

What the permit costs in 2026-27

Monash publishes its fees each financial year. The current schedule: a $309.20 application fee, paid when you lodge and not refunded, then the permit itself at $160.60-$405.80 for local roads or $276.30-$744.30 where the crossing meets an arterial road, plus a security deposit that is refunded after the final inspection finds no damage. If the council has to come back three or more times to pass the reinstatement, a $215 inspection fee joins the bill.

Two things to hold onto. These are the council’s fees, so they change when the council changes them and they sit outside any concreting quote; and they are a fraction of what fixing an unapproved crossing costs. On our jobs the permit path is identified at the free measure and written into the programme, with the crossover’s concrete priced inside the normal driveway rate of $95-$185 per m2. Guide rates until the job is measured; the written quote after the visit is the number we hold to.

What goes in the application

Two documents are mandatory: a site plan showing the proposed crossing with measurements and the features around it, and at least five photos of the site taken before any work starts. The council also recommends a traffic management plan and the works manager’s public liability certificate, and can ask for a neighbour notification letter or service authority paperwork where the site calls for it. Lodge an incomplete application and sit on the council’s information request for a month and the application is cancelled, application fee gone.

Monash allows itself up to ten working days to assess, and the permit runs for six months from issue, with extensions available on request.

The rules the crossing has to meet

  • One crossing per residential property. Build a new one and any redundant crossing must come out, with the kerb and nature strip reinstated.
  • 3 metres standard width, 3.5 metres maximum. The wide double frontages of Wheelers Hill get their width inside the boundary, not at the kerb.
  • At least 9 metres from a street corner.
  • At least 1 metre clear of street furniture: pits, poles, hydrants and signs. Closer needs written approval from the asset’s owner.
  • At least 4 metres from the trunk of a street tree, a figure that can flex either way depending on the tree; some species demand more room, and the council or its arborists make that call, never the concreter.

Where a clearance cannot be met, the application needs written service authority approval before the permit will issue. Arterial road crossings and anything attached to a unit development go further, through the council’s town planning desk and, for arterials, the state transport department.

How the inspections run

There are two. The pre-pour inspection happens after excavation, with the formwork up and before any concrete arrives; it is booked by phoning the council on 9518 3555 no later than 2pm the working day before, and runs on weekday mornings. Pass it and the pour proceeds. The re-inspection follows about a month after the work is done, checking the finished crossing and the footpath and kerb around it; a clean result releases the security deposit back to whoever paid it.

On a well-run job both inspections are simply programme entries. We book the pre-pour slot when the excavation date is set, the concrete truck is ordered for after the tick, and the curing clock starts the moment the screed leaves the surface.

What this means for your driveway job

The permit adds paperwork and a little lead time, not drama. A realistic sequence for a Monash driveway replacement: measure and quote in the first week, application lodged and assessed inside two more, break-out and excavation once the permit issues, pre-pour inspection, pour, and cars on the new surface seven days after that. The cost guide covers the concrete side of the budget, the calculator ranges your size and finish in seconds, and the suburb pages from Glen Waverley to Oakleigh cover what the jobs look like street by street. When you are ready to put a number on the whole thing, permit path included, book the free measure.

Primary source: the City of Monash's vehicle crossing pages, checked 16 November 2026.

Quick answers

How much does a Monash vehicle crossing permit cost?

On the council's 2026-27 schedule, the application fee is $309.20 and the permit itself runs $160.60-$405.80 on local roads, with arterial roads higher at $276.30-$744.30, plus a refundable security deposit. All of these are Monash's own fees, they change each financial year, and they sit outside any concreter's quote. The concrete side of a crossover is simply part of the driveway rate, $95-$185 per m2 by finish.

Can I make my crossover 4 metres wide?

Not in Monash. Residential properties are allowed one crossing, built at 3 metres standard width with 3.5 metres the absolute maximum. Wider entries get their width back inside the boundary, where the council's rules stop and your own driveway begins.

Do I need a permit to replace my crossover like for like?

Yes. Reconstructing a crossing needs the permit even when nothing about its position or width changes, and even when the crossover already appears on a building or planning permit, because Monash approves the crossing separately. Replacement is the single most common reason the permit gets pulled on our jobs.

What happens if a crossover is poured without the permit?

The council controls that strip of land, so an unapproved crossing risks being ordered up to standard or out of the ground at the owner's cost, which is a far more expensive path than the permit ever was. No reputable concreter will pour a crossover without the paperwork in place; it protects the owner as much as the trade.

Call (03) 7302 2900 Free quote